ASTM A513 Type 5 Dom Tubing Using ERW Welded Pipes as Blank Tubes for Precision Cold Drawing 1020 1026

• Customization: Available
• After-sales Service: Free
• Warranty: 1 Year
• Model NO.: DOM Tube
• Type: Welded
• Technique: Cold Drawn
• Material: Carbon Steel
• Surface Treatment: Oiled
• Usage: Hydraulic/Automobile Pipe, Food/Beverage/Dairy Products, Machinery Industry, Special Purpose
• Section Shape: Round
• Standard: ASTM 513 Type 5 or En 10305-2
• Od: 15-75 mm or 0.5-3 in.
• Wall Thickness: 1.5-6mm or 0.06-0.23 in.
• Customized: Support
• Trade Terms: EXW, Fob, CFR, CIF
• Length: 5.5-5.8 M
• Transport Package: Bundle/Wooden Box
• Specification: OD 3in(76.3mm) under
• Trademark: Bluesky-pipe
• Origin: Ningde
• HS Code: 7306309000
• Production Capacity: 50000 Ton/Year

Product Description

Product Description

  DOM tubing, or Drawn Over Mandrel tubing, is a high-strength steel tube manufactured using a specific cold-drawing process. It's not a type of steel, but rather a method that refines pre-existing electric resistance welded (ERW) tubing. This process involves pulling a steel tube through a die and over a mandrel, resulting in a tube with precise dimensions, smooth surfaces, and enhanced mechanical properties. 

   DOM tube may also be thermally treated after cold drawing to customize mechanical properties, improve machinability, and enhance toughness.

Introduction to DOM tube

advantages of DOM tubing

  DOM tubing is produced from electric resistance welded (ERW) tubes, often referred to as "mother tubes," which are altered into their final shape through a cold drawing process.
   Before drawing, the mother tubes undergo a phosphate bath to remove scale and add lubricity, ensuring the longevity of the dies during the drawing process.
   DOM tubing is typically made to ASTM A513 Type 5 standards. European standards, such as 10305-2, may also be applicable.
   Among the more common DOM round tube grades are 1020 and 1026.

  While DOM tubing starts as welded tubing, the drawing process makes the weld seam nearly undetectable, resulting in a seamless appearance and strong weld. 

Precision: DOM tubing boasts tight tolerances on outside diameter (OD), inside diameter (ID), and wall thickness, though only two of the three dimensions are guaranteed at a time.
Surface Finish: The process results in a superior surface finish, which is critical for applications requiring high precision.
Concentricity: DOM tubing provides maximum concentricity and minimal wall variation, making it a high-quality and cost-effective choice for demanding applications.

High Strength:The cold-working process enhances the mechanical properties of the steel, making it strong and durable. 

Minimal Additional Processing:DOM steel tube is also easily machined, requiring only a minimal amount of clean up in downstream processes providing significant cost savings.

DOM tube Application

Because of its superior advantages, DOM steel tube is the material of choice in the most demanding applications for high internal pressure, rotational, or cyclical-workload applications, including:

· Automotive ,Truck and Motorcycle components:Roll cages, bushings,suspension components, steering columns, bearings, motorcycle frames and forks and other critical parts. 
· Hydraulic Cylinders:Due to its smooth inner surface and strength

· Construction:Structural elements, railings, and other applications where strength and precision are needed. 
· Industrial Machinery:Used in various applications where a strong, accurate, and reliable tube is required. 

· fitness equipment:Dynamic balance test of treadmill drum

· furniture:Due to its smooth outer surface and strength

Specification

OD	15-75 mm or 0.5-3 in.	Wall Thickness	1.5-6mm or 0.06-0.23 in.
Standard	ASTM A513 Type or EN 10305-2	Customized	Support
Steel Grade	1010,1020,1035,1040,1340,1524,4130,4140, E195,E235,E275,E355,as customers' requirments
Package	Wooden case,Waterproof Woven Bag,as customers' requirments	Delivery time	25-40 days
Payment Term	T/T,L/C	Trade Terms	EXW,FOB,CFR,CIF
MOQ	1 ton	Surface Treatment	Oil,Phosphating,Polishing

ASTM A513 Type 5
OD Size Range in.[mm]	OD		ID
0.500 to 1.699             [12.70 to 43.75]	0.005 [0.13]	0.000 [0.00]	0.000 [0.00]	0.005  [0.13]
1.700 to 2.099              [43.18 to 53.31]	0.006 [0.15]	0.000 [0.00]	0.000 [0.00]	0.006 [0.15]
2.100 to 2.499              [53.34 to 63.47]	0.007 [0.18]	0.000 [0.00]	0.000 [0.00]	0.007 [0.18]
2.500 to 2.899    [63.50 to 73.63]	0.008 [0.20]	0.000 [0.00]	0.000 [0.00]	0.008  [0.20]
EN 10305-2  Sizes and tolerance

ASTM A513 DOM Tubing  Mechanical properties
DOM Tubing
Steel Grade	Rm(Mpa)	Reh(Mpa)	Elongation(%)	RB(min)
1010	415	345	5	73
1020	480	415	5	80
1035	620	550	5	90
1340	655	585	5	90
1524	620	550	5	90
4130	655	585	5	90
4140	760	690	5	90
DOM Stress-Relieved Tubing
1010	380	310	12	68
1020	450	380	10	75
1035	585	515	10	85
1340	620	550	10	87
1524	585	515	10	85
4130	620	550	10	87
4140	725	655	10	90

EN 10305-2 Mechanical properties
Steel Grade	Minimum values for the d elivery condition
	+C	+LC	+SR	+A	+N
	Rm(Mpa)/A%	Rm(Mpa)/A%	Rm(Mpa)/Reh(Mpa)/A%	Rm(Mpa)/A%	Rm(Mpa)/Reh(Mpa)/A%
E155	400/6	350/10	350/245/18	260/28	270~410/155/28
E195	420/6	370/10	370/260/18	290/28	300~440/195/28
E235	490/6	440/10	440/325/14	315/25	340~480/275/25
E275	560/5	510/8	510/375/12	390/22	410~550/275/22
E355	640/4	590/6	590/435/10	45022	490~630/355/22

Tubular parts

  We not only flexibly provide various standard steel pipes, but also support steel pipe cutting and subsequent processing, providing tubular parts. The video shows various forms of steel pipe cutting and precise straightening of the straightness of tubular parts, up to 0.05mm.

Customer visits

Packaging & Shipping

FAQ

Q: Are you trading company or manufacturer?
A: We are professional manufacturer for steel pipes,and our company also is a very professional and technical foreign trade company for steel products. We have more export experience with competitive price and best after-sales service. Apart from this,we can provide a wide range of steel products to meet the requirement of customer.

Q:Will you delivery the goods on time?
A: Yes,we promise to provide best quality products and delivery on time no matter if the price change lot or not. Honesty is our company's tenet.

Q: Do you provide samples ? is it free or extra?
A: The sample could can provide for customer with free,but the freight will be covered by customer account. The sample freight will be returned to customer account after we cooperate.

Q: How can I get your quotation as soon as possible?
A: The email and fax will be checked within 24 hours,meanwhile,Wechat and WhatsApp will be online in 24 hours. Please send us your requirement and order information,specification(Steel grade,size,quantity,destination port),we will work out a best price soon.

Q: Do you have any certifications?
A: Yes,that's what we guarantee to our clients. we have IS09000,IATF16949 certinicate,ISO 14001 certificates etc.Our products are of high quality and we have professional engineers and development team.

Q: What is your terms of payment?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipmenit or paid against copy of B/L within 5 working days. 100% Irrevocable L/C at sight is favorable payment term as well.

Q: Do you accept the third party inspection?
A: Yes absolutely we accept.

Company Profile